Tie-Rod Hydraulic Cylinder (ISO 6020-2 / NFPA)
The AF-HT series is a general-purpose industrial tie-rod cylinder, available in metric ISO 6020-2 dimensions for European machinery and imperial NFPA dimensions for North American equipment.
Send us the existing cylinder’s part number or a drawing and we will confirm interchangeability before quoting.
Sample data. Specifications on this page are placeholders for the prototype and must be replaced with the partner factory’s verified data before launch.
Technical specifications
| Bore sizes | 25, 32, 40, 50, 63, 80, 100, 125, 160, 200 mm (NFPA 1.5" – 8") |
|---|---|
| Rod diameters | Two rod sizes per bore |
| Stroke | Up to 3000 mm, any stroke on request |
| Nominal pressure | 160 bar (ISO 6020-2); NFPA ratings per series |
| Medium | Mineral hydraulic oil (HL / HLP); other fluids on request |
| Fluid temperature | -20 to +80 °C |
| Cushioning | Optional adjustable cushioning at both ends |
| Piston rod | Induction-hardened, hard-chromed steel |
| Ports | BSPP, metric or SAE / NPTF threads |
Features
- ✓ ISO 6020-2 and NFPA interchangeable dimensions
- ✓ Every cylinder pressure tested before shipment
- ✓ Replaceable seal kits and spare parts available
Mounting options
- ✓ Front / rear flange
- ✓ Rear clevis and spherical bearing
- ✓ Intermediate trunnion
- ✓ Foot / side lugs
- ✓ Extended tie rods
Options
- ✓ Position sensors and limit switches
- ✓ Viton seals for high temperature
- ✓ Stainless steel rod
- ✓ Custom paint colour and private label
Typical applications
- ✓ Industrial machinery and presses
- ✓ Injection moulding machines
- ✓ Steel and metal processing
- ✓ Test rigs
Interchangeable with
Same mounting standard as the following series. Please confirm the exact part number with us before ordering.
- Parker HMI
- Bosch Rexroth CDT3
- Parker 2H
All brand names and part numbers are trademarks of their respective owners and are used for identification and compatibility reference only. Actufora is not affiliated with, endorsed by or an authorized distributor of these brands.
Have a part number or drawing?
Send it to us. We will match an equivalent cylinder and come back with a factory quotation.